QS Metrology Private Limited

Auto Element Judgment (AI Function)

The 1600D automatically determines the type of element (poin tline

circle).

Dimension Display Function

The actual measured values for parameters and geometric deviation

can be displayed on the diagram.

Profile Synthesis Function (merging of several different profiles)

The limitations on the analysis range due to the angle of the stylus

are addressed with the synthesis function.

Peak and Valley Function

This function enables the maximum workpiece point to be detected by

tracing with the stylus, simplifying alignment.

Calculation Point Repeat Function

Overall workpiece analysis can be executed after completing only one

pattern analysis for workpieces where certain shapes are repeated.

Workpiece Trace Function

The measuring range can be determined by tracing the workpiece

once. This is effective for measurement of minute profiles.

Easy Evaluation of Part Contour

Exact data on parts that were previously evaluated with a projector or

tool microscope can be obtained in a short period of time. The

measured results can be used as is for inspection reports.

High Efficiency Measurement

The teaching/playback function automates the entire process, from

We offer high precision Contour Measuring Machine that enables measurement of difficult workpieces. The new linear motor enables the fastest measurement speeds and low vibrant of stable, high-magnification measurement. The user-friendly instrument is equipped with high accuracy contour detector.

CONTOURECORD 1700 DX/SD MAKE ZEISS TSK
Cutting-Edge Lineal Motor Dramatically Boots Precision The New Standard in Contour Measuring.

Salient features:

• Higher precision: Enables Measurement of difficult workpieces
• World's first linear motor drive (patent pending): The new linear motor enables the fastest measurement speeds in the world and low vibrant of stable, high-magnification measurement.
• High efficiency of 60 mm/s dramatically enhance measuring efficiency
• Small footprint: A modern design reduce the system footprint by 25%.
• Easy evaluation of contour of general purpose parts: Contour of parts that normally have been evaluated on a projector or tool microscope now can be obtained quickly and easily.
• Superior ACCRETECH functions:

1. Automatic element discrimination function (AI function),
2. Dimension line display function
3. Automatic crowning function
4. Calculation point repeat function
5. Workpiece trace function
6. Import/Export function.

• Combination of Analog-Digital
• System Expandability: When roughness measurement becomes necessary following installation the system can be upgraded to a multi-functional contour and roughness instrument. Full automatic operation enabled by adding the CNC table system.

Additional information:

• Accuracy: Z-axis indication accuracy: High mode ± (2.5 + |2H|/100µm. 20mm range or less. Normal mode ± (+3.5 + |4H|/100) µm, 50mm range,
• Measuring resolution : 0.1µm/5mm range, 0.4µm/20mm range, 1µm/50mm range
• X-axis indication accuracy: ± (1+2L/100) µm L: Measuring Length (mm).
• Measuring resolution: 0.1µm
• Sensing method: Z-axis: Differential Transducer, X-axis: Moiré striped scale
• Record: Vertical magnification- 0.01 – 10,000,000 Horizontal Magnification- 0.01 – 10,000,000.
• Min. measurement pitch: 0.01µm
• Max. Measurement points: 100,000 (max. 10 profiles)
• Measuring Feed Direction: Pull/Push both Directions.
• Measuring orientation: Up/ Down both directions.
• Stylus traceable angle: Ascend 77° Max., Descend: 87° Max.(smooth surface).

Calculations: point, line, circle, partial circle, ellipse, max. point/min, point, distance, coordinate difference, polar coordinate difference, orthogonal/polar coordinate difference display, intersecting elements, symmetric elements, coordinate control, surface area calculation, over-pin calculation, dimension line display function, calculation result/design value, mirror reversal, profile synthesis function, macro function, automatic element discrimination, calculation point repeat function, workpiece trace function, peak and vally function, auto operation log/playback function.

We offer contour measurement machine Contoure cord 2700DX / SD that is high in accuracy and supports high-resolution contour measurement. Designed and developed using advanced technology, it is low in weight and ensures outstanding expandability.

Salient Features:

• Low Weigh: New high-accuracy contour detector that weighs 40% less the other models.
• Linear motor Drive: Linear motor drive ensures Low vibration, high accuracy, high-speed movement.
• Choice of linear series DX type and SD type: Available as an all-in-one space-saving DX type or Conventional separate style SD type.
• Outstanding Expandability: Roughness detector and CNC table can be added. Flexibility to meet future needs.
• Flexible arm and Probe combination: This model uses a master ball calibration that corrects arc distortion(X-direction error) characteristics of a contour detector with the ability to combine a flexible arm and probe
• System Expandability (option): When roughness measurement becomes necessary following installation, the system can be upgraded to multi-functional contour and roughness instrument by adding roughness detector and roughness analysis program.

Additional information:

• Measuring range:
• Accuracy: X-axis indication accuracy (Horizontal): ± 1+2L/100 µm (±1.3µm/L±100mm)
• Resolution: 0.1µm
• Accuracy: Z-axis indication accuracy (Vertical): ± 0.8+|2H |/100 µm (±1.3µm/H±25mm)
• Resolution: 0.025µm
• Standard Settings: Zero Setting, X-axis setting, Parallel movement, rotary movement.
• Measuring resolution : 0.1µm/5mm range, 0.4µm/20mm range, 1µm/50mm range
• X-axis indication accuracy: ± (1+2L/100) µm L: Measuring Length (mm).
• Sensing method: Z-axis: Laser optical diffraction scale X-axis: Moiré striped scale
• Min. measurement pitch: 0.01µm
• Max. Data points: 100,000 points
• Magnification: 0.01 to 10,000,00 (arbitrary or automatic)
• Drive Unit: ± 15° (option)
• SENSOR:
• Stylus radius: Replaceable, 25µmR.
• Stylus traceable angle: Ascend 77° Max., Descend: 87° Max.(smooth surface).
• Measuring Feed Direction: Pull/Push both Directions.
• Measuring orientation: Up/ Down both directions.

Calculations: point, line, circle, partial circle, ellipse, max. point/min, point, distance, coordinate difference, polar coordinate difference, orthogonal/polar coordinate difference display, intersecting elements, symmetric elements, coordinate control, surface area calculation, over-pin calculation, dimension line display function, calculation result/design value, mirror reversal, profile synthesis function, macro function, automatic element discrimination, calculation point repeat function, workpiece trace function, peak and valley function, auto operation log/playback function. Profile value collation, best fit, design value generation, IGES/DXF conversion.

The contour measuring instruments from ZEISS feature a linear drive in the X axis. Compared to the standard spindle drive, significantly higher travel speeds are possible with this magnetic linear drive. Noise from the spindle or spindle eccentricity are avoided.

Flexible CNC measuring station for contour measurements. The instrument is designed to measure any intricate profile in a 2 dimensional format. The measured profile can be post-processed in the advanced ACCTee software to analyze the profile and extract dimensional details.

Key features

Auto Element Judgment (AI Function)

The 1600D automatically determines the type of element (poin tline

circle).

Dimension Display Function

The actual measured values for parameters and geometric deviation

can be displayed on the diagram.

Profile Synthesis Function (merging of several different profiles)

The limitations on the analysis range due to the angle of the stylus

are addressed with the synthesis function.

Peak and Valley Function

This function enables the maximum workpiece point to be detected by

tracing with the stylus, simplifying alignment.

Calculation Point Repeat Function

Overall workpiece analysis can be executed after completing only one

pattern analysis for workpieces where certain shapes are repeated.

Workpiece Trace Function

The measuring range can be determined by tracing the workpiece

once. This is effective for measurement of minute profiles.

Easy Evaluation of Part Contour

Exact data on parts that were previously evaluated with a projector or

tool microscope can be obtained in a short period of time. The

measured results can be used as is for inspection reports.

High Efficiency Measurement

The teaching/playback function automates the entire process, from

measurement to pasting of the data into an inspection report. 

The contour measuring instruments from ZEISS feature a linear drive in the X axis. Compared to the standard spindle drive, significantly higher travel speeds are possible with this magnetic linear drive. Noise from the spindle or spindle eccentricity are avoided.

Contourecord 1600G is a flexible CNC measuring station for contour measurements. The instrument is designed to measure any intricate profile in a 2 dimensional format. The measured profile can be post-processed in the advanced ACCTee software to analyze the profile and extract dimensional details. 

Key features

Auto Element Judgment (AI Function)

The 1600D automatically determines the type of element (poin tline

circle).

Dimension Display Function

The actual measured values for parameters and geometric deviation

can be displayed on the diagram.

Profile Synthesis Function (merging of several different profiles)

The limitations on the analysis range due to the angle of the stylus

are addressed with the synthesis function.

Peak and Valley Function

This function enables the maximum workpiece point to be detected by

tracing with the stylus, simplifying alignment.

Calculation Point Repeat Function

Overall workpiece analysis can be executed after completing only one

pattern analysis for workpieces where certain shapes are repeated.

Workpiece Trace Function

The measuring range can be determined by tracing the workpiece

once. This is effective for measurement of minute profiles.

Easy Evaluation of Part Contour

Exact data on parts that were previously evaluated with a projector or

tool microscope can be obtained in a short period of time. The

measured results can be used as is for inspection reports.

High Efficiency Measurement

The teaching/playback function automates the entire process, from

measurement to pasting of the data into an inspection report.

• Auto Element Judgment (AI Function)
  The 1600D automatically determines the type of element (point-line-circle).
• Dimension Display Function
  The actual measured values for parameters and geometric deviation can be displayed on the diagram.
• Profile Synthesis Function
  The limitations on the analysis range due to the angle of the stylus are addressed with the synthesis function.
• Peak and Valley Function
  This function enables the maximum workpiece point to be detected by tracing with the stylus, simplifying alignment.
• Calculation Point Repeat Function
  Overall work piece analysis can be executed after completing only one pattern analysis for work pieces where certain shapes are repeated.
• Work piece Trace Function
  The measuring range can be determined by tracing the work piece once. This is effective for measurement of minute profiles.
• Easy Evaluation of Part Contour
  Exact data on parts that were previously evaluated with a projector or tool microscope can be obtained in a short period of time. The measured results can be used as is for inspection reports.
• High Efficiency Measurement
  The teaching/playback function automates the entire process, from measurement to pasting of the data into an inspection report